Bergen R/C Forums Forum Index Bergen R/C Forums
Everything to do with Bergen R/C Helicopters
 
 AlbumAlbum  FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Turbine Observer Specs

 
Post new topic   Reply to topic    Bergen R/C Forums Forum Index -> Turbine Observer
View previous topic :: View next topic  
Author Message
cbergen



Joined: 12 Jan 2007
Posts: 124
Location: Cassopolis, MI

PostPosted: Tue Jan 16, 2007 1:34 pm    Post subject: Turbine Observer Specs Reply with quote

TURBINE OBSERVER SPECIFICATIONS
NOVEMBER 2006


Length: 65" Height: 22" Weight: 25 lbs. Fuel Total: 88 oz.

Main Blades: 850 mm or 890 mm MAH Hi Lift Blades(included) Tail Blades: 130 mm(included)

Rotor Span: 6' 5" (77") Tail Rotor Diameter: 13.5"

Engine: Wren MW 54 2 Stage Turbine Engine Gear Ratio: 10:1:4.67

The Bergen R/C Helicopters Turbine Observer is a dedicated Camera Ship. Based on our Observer mechanics, the reliable and powerful Wren MW 54 Turbine Heli Engine, and 850mm standard or 890 MAH Hi Lift Blades, we have added a front mounted pan and tilt system to give you a machine capable of lifting up to 40 lb useful payload of camera equipment and radio gear. The camera mount is capable of supporting up to 10 Lbs total, including camera, Batteries, and downlink equipment.

Putting the camera equipment on the front keeps you from having to utilize a tall landing gear and the inherent problems associated with it. A front mounted camera also allows you a clear 270-degree field of view, and the pan and tilt system is vibration isolated from the mechanics with 5 heavy -duty isolators to give you the clearest picture possible.

The Turbine Observer uses G10 stacked frames and a torque tube drive on the tail. It also comes with all the standard features from the Intrepid line of helicopters, including a self aligning double stacked clutch system, Double stacked Main Gear, a triple bearing block supporting the drive pinion and start shaft, a 10mm fully hardened hollow main shaft, an all aluminum head and blade grips, and an aluminum push-pull control system designed to eliminate any swash plate interaction through the full range of travel. What this means is a reliable and stable platform for your camera gear.

The dual 33 oz. fuel tanks plus a single 22 oz. tank provides a flying time of approximately 40 minutes.

This helicopter is prebuilt and test flown by Bergen R/C prior to delivery. Your radio gear is requested, or can be purchased through us.


_________________
Chris Bergen
Bergen R/C Helicopters
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Bergen R/C Forums Forum Index -> Turbine Observer All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group