Bergen R/C Forums Forum Index Bergen R/C Forums
Everything to do with Bergen R/C Helicopters
 
 AlbumAlbum  FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Puller for fan hub and flywheel

 
Post new topic   Reply to topic    Bergen R/C Forums Forum Index -> Tools
View previous topic :: View next topic  
Author Message
cbergen



Joined: 12 Jan 2007
Posts: 124
Location: Cassopolis, MI

PostPosted: Thu Dec 13, 2007 6:33 pm    Post subject: Puller for fan hub and flywheel Reply with quote

This tool makes it a cinch to remove the fan and hub from the 90's and the fan and hub PLUS the flywheel from the gas engines.



#1001T $14.95 includes 2 ea 4X16 SHCS and 2 ea 6X25 SHCS

The entire toolkit is available, #TOOLKIT, $24.95. Includes all 3 tools.



Use the 4X16 SHCS for pulling the fan and hub. On the gasser engine, leave the retaining bolt installed loosely, so you have something to push against.

On the Nitro engine, remove the collet nut entirely, pushing against the crankshaft.



To remove the flywheel, remove the retaining Dawg or nut, and use the 6X25 SHCS threaded into the flywheel, and push against the crankshaft.

After removing the flywheel, you wil find a woodruff key in the crankshaft that must be removed before separating the crankcase halves. Rapping it with a hammer and flat tip screwdriver will get it to pop out.

_________________
Chris Bergen
Bergen R/C Helicopters
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Bergen R/C Forums Forum Index -> Tools All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group